System Manager/Zone Coordinator User’s Manual 31
428516-YUM-B-0908
4. Press the button for the modem parameter you want to change. The button
label describes the current setting. When you press the button, the appropriate
screen appears, allowing you to change the value. Table10 lists these
parameters and their ranges or possible selections.
5. Make the modem parameter changes and press OK. The Modem Setup screen
returns, reflecting the changes you made.
Specifying Ethernet Settings
To specify Ethernet settings:
1. From the Home screen, press the Setup icon. The System Manager Setup or
Coordinator Setup and Status screen appears.
2. For a System Manager, press the System Manager button. The System
Manager Setup screen appears.
For a Coordinator, press the Coordinator button. The Coordinator Setup screen
appears.
3. Press the Ethernet Setup button. The Ethernet Setup screen appears.
Table 10: Modem Parameters
Parameter Parameter Range/Selections
Allow Incoming Connections True or False
Note: Set to True if computers are permitted to
remotely access the unit over a dial-up
connection.
Baud Rate 9600; 19200; 38400; 57600; 115200
Wait for Di al Tone before Dialing True or False
Extra Initialization Commands Enter modem initialization commands, up to 30
characters.1
1. A full keyboard screen appears allowing you to enter the characters of the command. Press OK
to save the character set. The Modem Setup screen returns, indicating the modem initialization
string you entered.