York YKSMU2x0-0 Mail Destination Setup Parameters, Configuring Text Message as Alarm Destination

428516-YUM-B-0908

4.Press the button for the e-mail parameter you want to change. The button label describes the current setting. When you press the button, the appropriate screen appears, allowing you to change the value. Table 13 lists these parameters and their ranges or possible selections.

Table 13: E-mail Destination Setup Parameters

Parameter	Parameter Range/Selections
E-mail Address	Enter a valid e-mail address up to 30 characters1
SMTP Server Host	Specify SMTP server as a host name (up to 30
	characters) or enter an IP address2
Alarm Priority Required to Send E-mail	Select one of these options:
Message	• Service, Service Priority and Critical
	• Service Priority and Critical
	•	Critical
	•	None
SMTP Port	0-65535
Authentication Needed	Yes or No
SMTP User Name3	Enter SMTP User Name up to 24 characters
SMTP Password3	Enter SMTP Password up to 20 characters. After
	you enter the password, its characters appear as
	asterisks (*) on the setup screen.

1.A full keyboard screen appears, allowing you to enter an e-mail address. Press OK to save the e-mail address; remember to include the @ symbol. The e-mail Setup screen returns, indicating the address you entered.

2.A full keyboard or keypad appears, allowing you to enter the host name or IP address. Press OK to save the name/address. The e-mail Setup screen returns, indicating the name/address you entered.

3.This parameter appears only if Authentication Needed = Yes.

5.Make the e-mail destination changes and press OK. The E-mail Setup screen returns, reflecting the changes you made.

Configuring Text Message as Alarm Destination

To configure a text message as an alarm destination:

1.From the Home screen of the System Manager or Zone Coordinator, press the Alarm Summary icon. The Alarm Summary screen appears.

2.Press the Alarm Setup button. The Alarm Setup screen appears.

System Manager/Zone Coordinator User’s Manual 51