York YK-ZCU2x0-0, YKSMU2x0-0 Text Message Setup Parameters Part 2, Setting Alarm Indicators

428516-YUM-B-0908

Table 14: Text Message Setup Parameters (Part 2 of 2)

Parameter	Parameter Range/Selections
Alarm Priority Required to Send Text	Select one of these options:
Message	• Service, Service Priority and Critical
	• Service Priority and Critical
	•	Critical
	•	None
SMTP Port	0-65535
Authentication Needed	Yes or No
SMTP User Name3	Enter SMTP User Name up to 24 characters
SMTP Password3	Enter SMTP Password up to 20 characters. After
	you enter the password, its characters appear as
	asterisks (*) on the setup screen.

1.A full keyboard screen appears, allowing you to enter an e-mail address. Press OK to save the e-mail address; remember to include the @ symbol. The E-mail Setup screen returns, indicating the address you entered.

2.A full keyboard or keypad appears, allowing you to enter the host name or IP address. Press OK to save the name/address. The e-mail Setup screen returns, indicating the name/address you entered.

3.This parameter appears only if Authentication Needed = Yes.

5.Make the text message destination changes and press OK. The Text Message Setup screen returns, reflecting the changes you made.

Setting Alarm Indicators

To set alarm indicators:

1.From the Home screen of the System Manager or Zone Coordinator, press the Alarm Summary icon. The Alarm Summary screen appears.

2.Press the Alarm Setup button. The Alarm Setup screen appears.

3.Press the Alarm Indicators button. The Alarm Indicators Setup screen appears.

System Manager/Zone Coordinator User’s Manual 53