Z Microsystems SL manual Operations, Cable Connections, Power UP

OPERATIONS

CABLE CONNECTIONS

The connections panel may vary due to non-standard configurations. The following con- figuration shows both PS2 and USB cable connections on one sample. In most cases, the Command Console will utilize just one of these connector types.

PS2

KEYBOARD TRACKBALL

POWER VIDEO

HOST SERIAL	USB (TYPE B)
	KEYBOARD , TRACKBALL

POWER UP

When the Command Console is connected, apply power and ensure the main screen appears. If the display does not turn on within ten seconds, press the Standby button on the display panel upon completion of cabling. If the main screen does not appear after hardware and cabling installations are complete, consult the Troubleshooting section of this manual.

16

Doc# 27-0032UM Rev A Issued 07/05