INSTALLATION
SHIPMENT CONTENTS
Ensure all of the following parts are in- cluded in the package received from Z Mi- crosystems. Verify all parts have not been damaged during shipment. If any of the parts are missing or damaged, immediately contact Z Microsystems Customer Service at
•Command Console unit attached to the mounting plate
•Power Cable
•User Manual
•Video Cable
•Serial Cable
•
Remember to save the unit’s original shipping materials. It may be necessary to move the unit at a later date.
Required Tools
•Phillips screwdriver, 2 pt.
•5/16 wrench
Preparations
NOTE: For the fastest and easiest installation of the Command Console, follow these steps in the sequence they are presented.
In preparation to install the Command Console, take the following precautionary steps:
Verify the Command Console power switch is OFF.
Do not connect or disconnect the unit dur- ing an electrical storm.
The power cord plug must be connected to a properly grounded power outlet.
Any equipment to which the unit will be at- tached must also be connected to properly wired and grounded power outlets.
6
Doc#
