Z Microsystems ZX Station manual Front Panel

Operation

TRANZPAK 6

FRONT PANEL

The front panel of the TranzPak 6 contains three LEDs, a SCSI ID indicator, a push-switch to set the SCSI ID and a function switch.

The top LED indicates power to the hard disk drive. The middle LED indicates an active state when the computer is accessing the TranzPak 6. The bottom LED indicates a read only state.

The SCSI ID Indicator shows a number, which is the setting for the disk module.

The SCSI ID Set Switch is a push-to- set switch that advances the SCSI ID Indicator by one number with each push.

The Function Switch has four positions.

15

Document# 27-0007UM Issued 11/00 Rev. 1.0