Starting Point
TOOLS REQUIRED
DANGER: To avoid shock hazard:
•Do not connect or disconnect the ZX Station during an electrical storm.
•The power cord plug must be connected to a properly wired and grounded power outlet.
•Any equipment to which the ZX Station will be attached must also be connected to properly wired and grounded power outlets.
Required Tools and Equipment
•Phillips screwdriver with about 10" shaft.
•Adjustable wrench or box wrenches
PRECAUTIONS
NOTE: For the fastest and easiest installation of the ZX Station, follow these steps in the sequence they are presented.
In preparation to install the ZX Station, take the following precau- tionary steps:
Verify the ZX Station power switch is off. If the power is off, the light on the front panel will not be illuminated.
7
Document#
