Levelling

Level the washing machine by raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level.

Any necessary adjustment can be made with a spanner. Accurate levelling prevents vibration, noise and displacement of the machine during operation.

Some vibration is inevitable, especially if mounted on a wooden floor.

Sprung wooden floors are particularly susceptible to vibration. For advice, consult a builder. If possible, always place the machine on a solid floor.

P0850

Special conditions

If the floor is carpeted or covered with crumbly or soft material, insert a rigid support base under the feet to prevent noise, vibration or displacement. The base should protrude a few centimetres beyond the edges of the machine.

Warning

The machine should NOT be placed on deep pile carpeting.

Note

Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.

In the interest of the environment

Washing machines and dishwashers should be connected to the FOUL drainage system, the water will then be taken to a sewage works for treatment before being discharged safely into a river.

It is essential that these appliances are not connected to the surface water drainage system as this water is discharged directly into a river or stream and may cause pollution.

If you require any further advice please contact your local authority drainage department.

SHOWER

 

 

 

SINK

TOILET

BATH

 

BIDET

WASHING

DISHWASHER

MACHINE

RAINWATER

 

 

'RUN-OFF'

 

 

 

 

FOUL DRAIN

SURFACE WATER

 

FOUL SEWERS

DRAINS & SEWERS

 

 

 

 

 

SEWAGE

UNTREATED

 

TREATMENT

DISCHARGE

 

WORKS

 

 

TREATED

 

 

DISCHARGE

RIVER

 

RIVER

 

 

P0987

 

 

31

Page 31
Image 31
Zanussi WD 15 manual Levelling, Special conditions, Interest of the environment