| Operation |
|
|
|
|
Cleaning Under | The transmissive (gap) sensor guide bar bracket |
the Sensor Bracket | can pivot up for easy cleaning. |
Step 1 | Open the print head carriage. |
Step 2 | Open the sensor bracket. Pull the slide lock to |
| the left and lift the front of the bracket up. |
Transmissive (Gap)
Sensor Bracket
Slide Lock
Step 3 Clean the metal part of the bracket, only. The sensor is recessed to protect it from labels and adhesive.
Clean the clear sensor window below the sensor bracket. Do not use abrasive cleaning materials. Only use water on a lint free, clean, damp cloth very lightly moistened. Let dry. Verify that the window is clear of streaks and clouding.
Step 4 Swing the sensor bracket down to close. The slide lock will automatically lock when in posi- tion.
Close the print carriage.
37 |
