Zebra Technologies Strata Thermal Printers manual Removing a Partially Used Transfer Ribbon

Operation

Removing A

Partially Used

Transfer Ribbon

A partially used transfer ribbon can be removed by following the steps below.

The unused portion of partially used transfer ribbons can be reloaded using the normal rib- bon loading procedure.

Step ➊ Open the print carriage to release ribbon ten- sion. Using scissors, cut the transfer ribbon just below the take-up roll.

Step ➋ Remove the supply roll and tape the end to prevent it from unwrapping.

Step ➌ Remove the take-up roll.

Discard used ribbon off the take-up core. Save the empty take-up core for when you load ribbon again.

980181-001 Rev.C 31