Zebra Technologies Strata Thermal Printers manual Installation

Installation

1 Installation

This section provides information on the installation of the printer and software.

Introduction The Strata printer models are low cost, manu- facturing oriented, thermal desktop printers. The Strata LP is a direct thermal printer. The Strata TLP is a thermal transfer and direct ther- mal printer. The printers have been specifically designed for printing large labels, hazardous material labels, small signs, fan-fold media, and shipping and receiving labels while operating in office to industrial environments.

The printer features sturdy construction, a small footprint, a heavy-duty motor, and sharp, reli- able printing up to 8.5 inches (216 mm) wide. The print head resolution of a Strata printer is 203 dpi (8 dots/mm).

The printer can print letter (8.5”x 11”) and A4 (210mm x 297mm) sizes. Print forms up to 8.5 inches (216 mm) wide and 22 inches (558.8

mm)long or two times A4 (210mm x 594mm) size with optional memory added.

980181-001 Rev.C 1