Troubleshooting
Tag Media Sensing
D 
B
The printer uses a moveable sensor to detect in- dex holes/notches in tag stock. The sensor can move from a center tag notch to a notch on the out side edge of tag stock as wide as 8.5 inches (216mm) wide.
C |
Direction
A
Left Side
Edge of Tag
Stock Media
Tag
C
L
The dimensions show the position acceptable position range of the “Notch” (hole) on tag stock for the printer and the gap sensor’s adjust- ment range.
Dimension | Min. | Max. | Nominal | |
A | .236” | — | .512” | |
(6mm) | (13mm) | |||
|
| |||
B | .079” | .512” | .118” | |
(2mm) | (13mm) | (3mm) | ||
|
CSensor Adjustment Range (Left Side): From Center of Media to 4.3”(109mm)
D.250” — — (6.35mm)
Maximum Media Width
With Roll Holders - 8.5” (216mm) Without Roll Holders - 8.75” (222mm)
46 |
