Zebra Technologies TLP 2824 manual Maintenance, Cleaning

Maintenance

Cleaning

When you clean the printer, use one or more of the following supplies that best suits your needs:

CLEANING SUPPLIES

Cleaning pens (12)

Cleaning swabs (25)

Cleaning cards, 2-in wide (25)

Save-a-Print Head film, 2-in wide (3)

The cleaning process takes just a couple of minutes using the steps outlined below.

Printer Part	Method				Interval
	Let the print head to cool for one minute, then use a new
	cleaning pen to swab the print elements (the thin gray
	line on the print head) from end to end. NOTE: You do
Print head	not have to turn off the printer to do this.				As
	If print quality remains poor after	cleaning,	try	the	necessary
					or after
	Save-a-Print Head cleaning film to	remove	buildup
					every five
	without damaging the print head. Call your authorized
					rolls of
	reseller for more information.
					media
	Manually rotate the platen roller. Clean it thoroughly
Platen roller	with 70% isopropyl alcohol and a cleaning swab,
	cleaning card, or lint-free cloth.
Peel bar	Clean it thoroughly with 70% isopropyl alcohol and a
Tear bar	cotton swab.
Exterior	Water-dampened cloth				As needed
Interior	Brush or air blow
Cutter	Use tweezers to remove scraps

980485-001A 27