|
|
|
Before following the steps in this | MOVIE | |
procedure, open the printer by |
| |
pulling the release latches forward then | ||
lifting the top cover. Remove any ribbon | ||
from the carriage. |
| |
Removal |
| |
1. | Grasp the print head spring and pull it | |
| to the left; then, slide it free of the | |
| carriage. |
|
2. | Use the spring to pry the print head | |
| clip off the right side of the carriage. | |
3. | Pull the print head and bracket |
|
| forward. |
|
4. | Use a #2 Phillips driver to remove the | |
| screw that holds the ground wire. | |
5. | Unplug both bundles of print head | |
| wires from their connectors. |
|
32 |
| |
