Zebra Technologies TLP 2824 manual Loading Ribbon, Install the Ribbon Supply Roll

Loading Ribbon

MOVIE

You must use thermal transfer media (accepts wax and/or resin transferred off a ribbon) when you use a ribbon. When loading ribbon, you install the supply and take-up rolls, then tighten the ribbon on the carriage.

Install the Ribbon Supply Roll

Before following these steps, prepare the ribbon by removing its wrapping and pulling its adhesive strip free.

1. Thread the ribbon through the carriage.

2. Press the right side onto the supply hub.

3. Align the notches on the left side and mount onto the spokes of the left hub.

Install the Take-Up Core
	1. Press the right side onto the take-up
	hub.
	2. Align the notches on the left side and
	mount onto the spokes of the left hub.
	You can find your first ribbon take-up
	core in the packing box. Subsequently,
	use the empty supply core to take up the
	next roll of ribbon.
12	980485-001A