Zebra Technologies zebra p330 user manual Setting the Card Thickness Control

Installation and Setup

Setting the Card Thickness Control

Setting the Card Thickness Control

The Card Thickness Control is set by the user to adjust the gap as cards enter the printer, to prevent double-feeds (which could cause a jam) or mis-feeds.

Note • Set the Card Thickness Control before loading cards.

1.Open the Card Feeder cover. The cover is hinged; lift it by the lip at the right front corner.

Note • To reduce contamination and ensure better print quality, minimize the time the Card Feeder cover is open.

2.The Card Thickness Control Lever is at the front of the left-side opening of the Card Feeder area.

16 P330i User’s Manual 980459-001 Rev. A