Zebra Technologies zebra p330 user manual Network Status/Activity Indicator

Troubleshooting

Troubleshooting the Ethernet Connection and Adapter

5.If the LED is alternately flashing red and green for longer than 2 minutes, the Ethernet Adapter is in firmware-download mode. This means it is waiting for new firmware data to be sent before it continues normal functioning. Perform the following:

•If the Ethernet Adapter was purposely put into firmware-download mode, finish the download with the proper update utility. Contact the Zebra web site at http://www.zebra.com to download this utility.

•Contact Technical Support for help recovering this unit.

Network Status/Activity Indicator

A bi-color Status/Activity LED indicates network speed, established link, and network activity.

1.If the LED is off, no link was established.

2.If the LED is solid green, a 100Base link is established.

3.If the LED is flashing green, a 100Base link is established and network activity has been detected.

4.If the LED is solid orange, a 10Base link is established.

5.If the LED is flashing orange, a 10Base link was established and network activity has been detected.

Network activity detected by this LED does not mean the activity is data for the print server. The activity is all activity on the network seen on the Ethernet Adapter.

42 P330i User’s Manual 980459-001 Rev. A