Smart Card Contact Station
Smart Card Contact Station Interface
Smart Card Contact Station Interface
When a command to the printer interface sends a card to the Smart Card Contact Station, the printer connects the Smart Card Contact Station to the female
Smart Card Contact Station
An attached external Smart Card Programmer can be used to program Smart Card chips. The following table shows the Smart Card Contact Points.
| Smart Card Contact Points | Smart Card Contact Points | ||
|
|
|
| |
1 | C1 (VCC) | 6 | C6 (Vpp) | |
|
|
|
| |
2 | C2 (Reset) | 7 | C7 (I/O) | |
|
|
|
| |
3 | C3 (Clock) | 8 | C8 (RFU) | |
|
|
|
| |
4 | C4 (RFU) | 9 | (GND when chip is at station) | |
|
| |||
5 | C5 (GND) | |||
|
| |||
|
|
|
|
52 | P330i User’s Manual |
