66Configuration

Control Panel Parameters

Table 12 • Printer Parameters (Page 5 of 24)

Parameter Action/Explanation

Set Print Width

This parameter specifies the printable area across the width of the label. Table 13 shows the ranges and default values for print width, which are based on the printer model and the printhead resolution.

Table 13 • Print Width Ranges and Maximum Values

Printhead

 

Printer

 

 

 

Resolution

ZM400

 

ZM600

 

 

 

 

 

 

200 dpi

Default Value: 832

 

Default Value: 1344

 

Range: 2 to 832 dots

 

Range: 2 to 1344 dots

 

 

 

 

300 dpi

Default Value: 1248

 

Default Value: 1984

 

Range: 2 to 1248 dots

 

Range: 2 to 1984 dots

 

 

 

 

600 dpi

Default Value: 2496

 

N/A

 

Range: 2 to 2496 dots

 

 

 

 

 

 

Note • Setting the width too narrow can result in portions of a label format not being printed on the media. Setting the width too wide wastes formatting memory and can cause printing off of the label and on the platen roller. This setting can affect the horizontal position of the label format if the image was inverted using the ^POI ZPL II command.

To change the value shown:

1.Press SELECT to select the parameter.

2.Press PLUS (+) or MINUS (-)to change the value shown.

3.Press SELECT to accept any changes and deselect the parameter.

79695L-001 Rev. A

ZM400/ZM600 User Guide

3/27/07