Zebra Technologies ZM600, ZM400, ZM400201101L0T ZPL and XML only, Select Idle Display, Select Format Convert

			Configuration	83
			Control Panel Parameters
		Table 12 • Printer Parameters (Page 22 of 24)
	Parameter		Action/Explanation
ZPL and XML only			Select Format Convert
			Selects the bitmap scaling factor. The first number is the original dots per
			inch (dpi) value; the second, the dpi to which you would like to scale.
			Default Value: NONE
			Selections: NONE, 150 → 300, 150 → 600, 200 → 600, 300 → 600

To change the value shown:

1.Press SELECT to select the parameter.

2.Press PLUS (+) or MINUS (-)to scroll through the options.

3.Press SELECT to accept any changes and deselect the parameter.

Select Idle Display

This parameter selects the LCD options for the real-time clock.

Note • If the default value is not selected, pressing PLUS (+) or

MINUS (-)briefly displays the firmware version of the printer.

Default Value: FIRMWARE (FW) VERSION

Selections: MM/DD/YY (24HR), MM/DD/YY (12HR), DD/MM/YY (24HR), DD/MM/YY (12HR), FW VERSION

To change the value shown:

1.Press SELECT to select the parameter.

2.Press PLUS (+) or MINUS (-)to scroll through the options.

3.Press SELECT to accept any changes and deselect the parameter.

3/27/07 ZM400/ZM600 User Guide 79695L-001 Rev. A