Zenith DVD-2220 warranty Connecting to an Audio System

PAGE 14

CONNECTIONS

ConnectingtoanAudioSystem

You can listen to the sound of audio CDs and DVD video discs in stereo.

	COMPONENT	AUDIO OUT
	VIDEO OUT	1	2
			L
	Pb
			R
DIGITAL OUT	Pr		S-VIDEO

OUT

VIDEO

OUT

COAXIAL Y

OPTICAL

To AUDIO OUT

(white) (red)

L R (yellow)

To VIDEO

OUT

To S-VIDEO OUT

If the TV has an S-video input, connect the DVD player with the supplied S-video cable.

To S-video input

S-video cable (supplied)

To video input (yellow)

TV or monitor with audio/video inputs

To audio inputs of the amplifier

(red)

(white) Audio system

Notes

❍Refer to the owner’s manual of your audio system as well.

❍When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

❍If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, move the DVD player away from the tuner and radio.

❍The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

❍Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the speakers may be damaged.

Warning

Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the coaxial digital audio jack of this DVD player to an AV decoder that has the Dolby Digital (AC-3) decoding function. High volume sound may damage your hear- ing as well as the speakers. (Refer to “Selecting Digital Audio Output” on page 39.)