Zenith DVD-2220 warranty Connecting to Optional Equipment, Enjoying Dolby Digital AC-3 Sound

CONNECTIONS

PAGE 15

ConnectingtoOptionalEquipment

Enjoying Dolby Digital (AC-3) Sound

You can enjoy the high quality dynamic sound of Dolby Digital (AC-3), Dolby Pro Logic, and 2 Channel Digital Stereo.

Dolby Digital (AC-3)

Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the DVD player to a 6 channel amplifier equipped with a Dolby Digital (AC-3) decoder or Dolby Digital (AC-3) processor.

	COMPONENT	AUDIO OUT
	VIDEO OUT	1	2
			L
	Pb
			R
DIGITAL OUT	Pr		S-VIDEO

OUT

VIDEO

OUT

COAXIAL Y

OPTICAL

To DIGITAL OUT	To S-VIDEO OUT
(COAXIAL or OPTICAL)
	or VIDEO OUT

To enjoy Dolby Digital (AC-3) sound from this DVD player you need the following:

●DVD video discs recorded in Dolby Digital (AC-3)

●6 channel amplifier equipped with a Dolby Digital (AC-3) decoder, of Dolby Digital (AC-3) processor and power amplifier

●5 speakers and 1 sub woofer

To enjoy Dolby Digital (AC-3) sound

You need to select the recording system. And select “AC-3”.

75 ohm coaxial cable		S-Video cable
		or Video cable
Amplifier equipped	To digital	Connection
with a Dolby Digital
	audio input	example
(AC-3) decoder

	To S-video Input	Front speaker
	or Video Input
		(right)
Front speaker
	Center
(left)
	speaker

	Sub woofer
Rear speaker	Rear speaker
(left surround)	(right surround)

*Manufactured under license from Dolby Laboratories Licensing Corporation. “Dolby”, “AC-3” and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

Confidential Unpublished Works. C 1992-1997 Dolby Laboratories, Inc. All rights reserved.

Notes

❍Refer to the owner’s manual of your audio equipment as well.

❍When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

❍The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

❍Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the speakers may be damaged.