Zenith H25F39DT Managing the Channel Banks, Repeat steps 2, and 3 to program another channel bank

Managing the Channel Banks

The TV has four channel banks, where the administrator or installer can store groups of TV channels Note: Channel banks set up requires an installer’s remote with “Source” or “Bank” keys like the Zenith MBR3447, or a similar remote.

PLANNING THE CHANNEL BANKS

Generally, TV channels are grouped into “program pack- ages” with terms that are proposed to the end user. The user then opts for a package. Below is an example of how TV channels may be grouped.

You may plan your package by using a chart like the one after the following page.

Remember, you can “blank” a channel for accommodating audio-only, such as an FM radio station or in-house com- munication.

Sometimes, only one or two channel banks may be need- ed. You may leave any unused bank with the channels entered during Auto Program; or, you may delete the chan- nels. However, you may want to leave at least one channel in any unused bank. Then, if someone selects an “unused” bank, that channel will assure them that the TV is func- tional.

Note: Some channels from factory testing may be in the channel banks if you have not yet run Auto Program.

ADDING / DELETING CHANNELS

A previously prepared programming chart is helpful.

1.Run Auto Program (in the Setup menu). All channels found on your cable/antenna will be entered in Channel Banks 1, 2, 3, and 4.

Note: Be advised that running Auto Program overwrites any custom channel setups; removes Blanked, Deleted.

2.Select a channel bank with an installer remote - -press SOURCE/BANK (and repeat). CHANNEL BANK and BANK number will be displayed.

3.Use the ADD/DEL/BLNK item (also in the Setup menu) to customize your program package. You may delete chan- nels or add some that have not been entered. You can also “Blank” a channel for accommodating an audio-only pro- gram source or in-house communication. See the “ADD/DEL/BLNK” menu page for more details.

Note: The Blank Channel feature is global. A channel will be blanked in all channel banks.

4.Repeat steps 2, and 3 to program another channel bank.

CHANNEL BANK

Channel Bank Program package

1Basic cable channels

2Extended cable channels

3Extended with premium channels

4Other cable service options (Grouping is provided as an example only.)

BANK 1

Channel Bank Number Display

The BLNK (blank) channel function is “global” -- the same channel number is blanked in channel banks 1, 2, 3, and 4.

P A G E 2 6