Zenith L20V54S warranty Installer Remote Control Key Functions

Installer Remote Control Key Functions

A brief list of the keys on the optional installer’s remote and what they do.

MUTE Turns sound Off and On, while the picture remains.

BANK

Press and repeat to select a Channel Memory Bank - - 1, 2, 3, or 4 (Standby).

SAP Selects MTS sound: Mono, Stereo, and SAP in analog mode. Change the audio language in DTV mode.

CHANNEL PREVIEW Displays available TV channels, and (if active) the Guest Parental Control menu: set V-Chip blocks to restrict both analog and digital programming.

• Aux Channel allows the guest to select the Audio / Video inputs. (Use the A/V jacks on the back of the TV as a source).

[-] BUTTON When selecting a digital broadcast channel, key in the Main channel number followed by the-> [-] -> then the sub channel number. Analog channels do not contain a sub channel number.

TIMER Press repeatedly to select a preset time to automatically shut the TV off.

MENU Press to display the main on-screen menu.

POWER

Turns TV On or Off.

GUIDE

Use to view DTV program information.

CC

Press to activate English subtitles.

INFO

Press to display current program information.

VOLUME / CHANNEL / OK (Enter) Increase or decrease the volume / Change channels.

Select on-screen menu items and change menu values.

NUMBER BUTTONS

Use for direct channel entry.

FLASHBK (FLASHBACK)

Use to return to the last channel viewed.

ALARM

Use to go to the Alarm menu. Set a time for the TV to turn itself on.

ADJ D / E, F / G

User ADJ (adjust) Up/Down menu arrows,

Left/Right to change the selected option.

BED 1/BED 2 (*See Note Below) Determines the code set transmitted, Bed 1 or Bed 2. Switch setting must correspond to item 27, HOSPITAL MODE setting in the TV’s Installer Menu.

Optional Installer

Remote Control

Part Number

3140OSKZ003AR6

*Note: Bed 1 - Bed 2 switch on patient remote. The position of the Bed 1 - Bed 2 switch must correspond to the setting in the Installer’s menu. The switch above can be set by sliding it to the Bed 1 or Bed 2 position. On the patient’s remote, the Bed 1 or Bed 2 position can be selected by using a paper clip or a ball-point pen to slide the switch to the correct position.

Left position = Bed 1. Right Position = Bed 2.

P A G E 1 9