Zenith L20V54S warranty User Remote Control Key Functions

User Remote Control Key Functions

A brief list of the keys on the optional patient remote control and what they do.

CC(Closed Captioning) Press to access closed captions.

POWER

Turns TV On or Off.

TV/FM Down arrow for navigating menus.

VOLUME (-/+)

Decreases/increases sound level.

NUMBER KEYPAD Selects channels directly and enters

numerical values for some options.

[-] BUTTON When selecting a digital broadcast channel, key in the Main channel number followed by the-> [-] -> then the sub channel number. Analog channels do not contain a sub channel number.

TIMER Press repeatedly to select a preset time to automatically shut the TV off.

MENU Press to display the main on-screen menu.

FLASHBK (Flashback)

Returns to the previous channel viewed.

MUTE

Turns sound Off and On, while the picture remains.

CHANNEL (-/+)

Tunes to next available channel.

ENTER

Press to view the Channel/Time display or to remove any on-screen display or menu.

BED 1/BED 2 (*See Note Below) Determines the code set transmitted, Bed 1 or Bed 2. Switch setting must correspond to item 27, HOSPITAL MODE setting in the TV’s Installer Menu.

CHANNEL PREVIEW

Displays available TV channels, and (if active) the Guest Parental Control menu: set V-Chip blocks to restrict both analog and digital programming.

• Aux Channel allows the guest to select the Audio / Video inputs. (Use the A/V jacks on the back of the TV as a source).

Optional Patient

Remote Control

Part Number

*Note: Bed 1 - Bed 2 switch on patient remote. The position of the Bed 1 - Bed 2 switch must correspond to the setting in the Installer’s menu. The switch above can be set by sliding it to the Bed 1 or Bed 2 position. On the patient’s remote, the Bed 1 or Bed 2 position can be selected by using a paper clip or a ball-point pen to slide the switch to the correct position.

Left position = Bed 1. Right Position = Bed 2.

P A G E 1 8