Zenith L20V54S warranty Installer Menu, Accessing the Installer’s Menu, Using the Installer’s Menu

Installer Menu

Use the Installer’s Menu to set up or change operational settings.

See more detailed descriptions of the Installer menu items on the following pages...

Accessing the Installer’s Menu

Make sure TV is on. Installer’s menu items can be accessed by using an installer’s remote control. Just press MENU repeatedly (at least 10 times) until the TV seems to stop responding, then press 9, 8, 7, 6, then ENTER to access the Installer’s menu. To remove the Installer’s menu, press ENTER again. Any changes you make will be stored in non- volatile memory. (The menu also disappears automatically.)

The Installer’s menu opens with item 000 INSTALLER SEQ 000. Use the Up/Down arrow keys to sequence through the available menu items. Or, access an item directly by keying in the line number, then pressing MENU. For example, to access the Sleep Timer option which is item 015, press 0-1-5, then MENU. To change a setting, use the Left/Right arrow keys. Or, enter a value directly.

Using the Installer’s Menu

Items 000 ~ 117 are immediately accessible only upon entering the Installer’s Menu. Their numbers, descriptions, ranges, factory default settings, and a place for listing any changes made on-site are given below and on the following pages.

Installer Menu Items 000 through 117

L20V54S PTC INSTALLER MENU

000	INSTALLER SEQ	000
UPN	000-000-000-000	FPGA 09F1
PTC V1.00.000		CPU V1.01.00

Typical Installer Menu

Menu Item	Function	Value Range		Default Value	Brief Description of Function and Comments
000	INSTALLER SEQ	0	~ 3	0	Leave default set to 0.
001	POWER MANAGE	0	~ 7	0	Sets number of hours of no activity before auto shut Off.
002	AC ON	0 / 1		0	Set to 1 to enable auto turn On at power up.
003	BAND/AFC	0	~ 3	1	Selects Tuning Band: 0=Broadcast, 1=CATV, 2=HRC, 3=IRC
004	STRT CHANNEL	0 ~ 127, 255		255	Channel at turn-on (Set 255 to return to last channel before power Off).
005	CHAN LOCK	0 / 1		0	If set to 1, cannot tune from current channel.
007	STRT VOLUME	0 ~ 63, 255		255	Sets Volume level at TV turn-on (Set 255 to retain last volume level).
008	MIN VOLUME	0 ~ 63		0	Sets minimum allowable volume setting.
009	MAX VOLUME	0 ~ 63		63	Sets maximum allowable volume setting.
010	MUTE DISABLE	0 / 1		0	Set to 1 to disable mute function.
011	KEY DEFEAT	0 / 1		1	Set to 1 to disable menu navigation keys on display panel.
012	IR BANKS EN.	0 / 1		0	Set to 1: enables TV to respond to IR code
013	SCAN MODE	0 / 1		1	Typically used for Hospitals: puts On-Off and FM in Ch Up/Down sequence.
014	STRT CH IN SM	0 / 1		0	Set to 1 to put TV on/off below start channel number.
015	SLEEP TIMER	0 / 1		1	Set to 1 to enable Sleep Timer.
016	EN TIMER	0 / 1		1	Set to 1 to enable On/Off Timers.
017	ALARM	0 / 1		1	Set to 1 to enable Alarm.
020	FEATURE LEVEL	0 / 1		1	Zen 1 Leave default set 1 (1 Zen 1)
021	V-CHIP	0 / 1		1	Set to 1 to enable V-Chip functions.
022	MAX BLK HRS	0 ~ 99		12	Sets number of V-Chip (Parental Control) blocking hours.
023	CAPTION LOCK	0 / 1		0	Set to 1 to retain caption setting at power Off.
025	FUNCTION PRE.	0	~ 3	1	Controls channel preview in Pay-Per-View function
027	HOSPITAL MODE	0	~ 2	2	Leave default set to 2.
028	CH. OVERIDE	0 / 1		1	If set to 0, limits direct access to favorite channels.
029	OLD OCV	0 / 1		0	Set to 1 to change M.P.I. operation to OCV.
030	ACK MASK	0 / 1		0	If set to 1, changes M.P.I. for some OCV boxes.
031	POLL RATE	20 ~ 169		94	Selects poll rate for M.P.I.
032	TIMING PULSE	186	~ 227	207	Sets baud rate for M.P.I.

P A G E 4 5