Zenith L20V54S warranty Enter button

Clock Setup (Continued)

Automatic Time Settings

	- If you select auto time setting, time will be set from the digital
	broadcast information.
1	Press the MENU button and then use the ADJ D / E button
	to highlight the Setup menu.
2	Press the OK (Enter) button to highlight Time.
3	Press the OK (Enter) button to highlight Clock. Manual or
	Auto will appear on the menu next to clock. Select Auto
	on the submenu with the Down arrow and press the OK
	(Enter) button.

Setup

--:-- --

--. -- ----

Time		G
V-Chip
Menu Language	English
Menu Transparency	Transparent
Set ID	96
Move	OK Select	Menu Back

4	Use the ADJ Up/Down/Left/Right arrows to set the
	Daylight Savings and Time Zone options for your local
	area. See the next page.
5	When finished setting the clock, press MENU repeatedly to
	remove the menus.

Setup

--:-- --

--. -- ----

Clock	Auto	G
Manual Clock
Daylight Saving	Yes
Time Zone	Pacific
On Timer
Off Timer
Auto Off	On
Move	OK Select	Menu Back

Caution: Some digital channels may change the time incorrectly using the Automatic Clock Set feature.

In this event, the Alarm may not function as intended and the TV may not turn on at the expected time.

If the end user will have access to the Alarm, it may be best to use the Manual Clock Set mode and set the clock to local time manually.

Setup

--:-- --

--. -- ----

Clock
Manual Clock
Daylight Saving
Time Zone	Auto
On Timer	Manual
Off Timer
Auto Off

Select Menu Back

Mini glossary

TIME	A four-digit figure broken down into hours and minutes, used to enter the current time when setting the clock or wake-up alarm.
HOURS	First two digits that are entered when setting the clock or the wake-up alarm.
MINUTES	The last two digits that are entered when setting the clock, or the wake-up alarm.

P A G E 2 4