F22
F23
F24
F25
English
10. Maintenance
Maintenance, replacement, or repair of the emission control device and systems may be performed by any
WARNING
Before cleaning, inspecting or repairing your unit, make sure that engine has stopped and is cool. Disconnect the spark plug to prevent accidental starting.
■MAINTENANCE AFTER EACH USE
1. Air filter
Dust on the cleaner surface can be removed by tapping a corner of the cleaner against a hard surface. To clean dirt in the meshes, split the cleaner into halves and brush in gasoline. When using compressed air, blow from the inside. (F22)
To assemble the cleaner halves, press the rim until it clicks. (F23)
2. Oiling port
Dismount the guide bar and check the oiling port for clogging. (F24)
(1) Oiling port
3. GUIDE BAR
When the guide bar is dismounted, remove sawdust in the bar groove and the oiling port. (F25)
(1) Oiling port
42
