Zoom 10BaseT 1, 2

Installing Your Cable Modem 9

Windows 95/98/Me Network Settings

To configure network settings on a computer running Windows

95/98/Me, follow these steps.

Note: The dialog boxes shown are representative of a typical

computer. What you see on your computer may differ

slightly.

1From the Windows desktop, click Start | Settings | Control

Panel, and then double-click the Network icon. The

Network dialog box appears.

Click the Configuration tab. A list of installed network

components is displayed. If you see a line that includes

TCP/IP (Transmission Control Protocol/Internet Protocol),

skip to Step 5. If you don’t see that line, continue with Step 2.

2In the Network dialog box, if TCP/IP is not listed, click the

Add button.

Contents

Main Page Contents Page Getting Started Cable Modem Service System Requirements What You Will Need For Installation Page Page Installing Your Cable Modem Requesting Cable Modem Service Page Page Macintosh operating systems 1 2 Configuring Your Computers Network Settings Windows 95/98/Me Network Settings 1 2 Page Page Page Page Page 7 8 Windows 2000 Network Settings Page Page Page Page Page Making the Connections Page Cable and Power Connections 1 Turn your computer on. 2 Connect one end of the 10BaseT/Ethernet cable to the 10BT 3 Connect the coaxial cable to the cable jack on your wall. (If 4 Insert the small round end of the power cord into the power Automated Synchronization Page Configuring Your Browser Internet Explorer 4.0 1 2 3 4 Page Page Page Using Your Cable Modem Connecting to the Internet Ending an Internet Session Unplugging the Modem Page Appendix A Front Panel Information Appendix B Troubleshooting Page Page Appendix C Regulatory Information FCC Part 15 Emissions Statement Industry Canada Emissions Statement Electrostatic Discharge Statement Reference Information