Appendix A
Front Panel Information
After you’ve correctly installed the Zoom Cable Modem, the READY light, 10BT light, and SYNC light go on to indicate that the modem is fully operational.
Light | Mode | Status |
READY | On | Power is on. |
10BT | On | The 10BaseT/Ethernet Cable |
|
| Modem is connected to the |
|
| computer (the computer must be |
|
| turned on). |
ACT | Blinking | Activity is present on the cable. |
|
| The cable modem is sending |
|
| data to the cable service provider |
|
| or receiving data from it. |
|
| This light flickers during the |
|
| synchronization process. |
SYNC | Blinking Fast | Searching for a data channel |
|
| from the cable provider. |
| Blinking Slow | Synchronizing with the cable |
|
| network and adjusting the signal |
|
| for optimum performance. |
| Steady On | The modem is synchronized to |
|
| the cable network. |
Appendix A: Front Panel Information | 31 |
