Zoom AP+2, WIRELESS-G

38 Zoom AP+2 User’s Guide

To specify the operation mode for the AP+2

1 From the Operating Mode drop-down list, select how you

plan to use the unit:

! Access Point. This is the default option. Select this option

if you plan to plug the AP+2 into a router, modem/router,

switch, or hub to allow wireless devices (for example,

computers) to make a wireless connection to your

network.

! Client Bridge (Infrastructure). Select this option if you

want to connect to an existing wireless network through an

access point (for example, to wirelessly enable a gaming

device). If you know you want to use the AP+2 as an

Ethernet client/bridge, but are unsure of which option to

choose, select Infrastructure.

! Client Bridge (AdHoc). Select this option if you want to

connect wirelessly without an access point to another

computer or gaming device in a “peer-to-peer” setup.

! Repeater. Select this option if you plan to install the

AP+2 near the edge of a wireless network’s area of

coverage to extend the area of coverage.

2 Click the Save Changes button.

3 When a confirmation message appears, click OK to change the

operating mode. Another message will appear letting you know

that it may take a few moments while the unit resets itself and

changes mode. Click OK. (Once the unit reboots itself, you

will be prompted to log into the Web Management Interface

again.)