Zoom AP+2, WIRELESS-G

Chapter 5: Advanced Options 39

Using the LAN Settings Page

Use the LAN Settings page to specify local area network settings

for your AP+2.

By default, the AP+2 is set up to use a static IP address

(10.0.0.200) to access its Web Management Interface. Any

requests from LAN devices for DHCP information will be passed

through to a router/DHCP server, which will send IP address

information through the AP+2 back to the LAN device.

To open the LAN Settings page, click LAN in the left-navigational

menu, then click LAN Settings.

To specify LAN settings

1 [Optional] Enter a name for the AP+2. By default, it is named

Zoom AP.

2 Specify whether you want to use dynamic or static IP

addressing by selecting one of the following option buttons:

! Configure a Static IP Address. Select this option button

if you want to use a static IP address to access the Web

Management Interface of the AP+2. This is the default

setting. With this option selected, wireless devices will

receive their IP addresses from a DHCP server on your

network (for example, a router). If you want the AP+2 to

assign the IP addresses to the wireless devices, select the

next option.