Chapter 5: Advanced Options 41
Using the Wireless Settings
Page
Use the Wireless Settings page to specify the SSID and channel
information for AP+2.
Once this information is set, all devices that you want to access
your wireless network must use these settings.
To open the Wireless Settings page, click Wireless in the
left-navigational menu, then click Settings.
To specify wireless settings
The following steps assume that you want to set up a wireless
network.
1
11
1 Select the Enable Wireless Network check box. (Note that if
you clear this, wireless networking will be disabled and the
other options on this page will disappear).
2
22
2 From the Wireless Channel drop-down list, select the radio
channel you want to use. If you are using the AP+2 as an
Ethernet client in Infrastructure mode, you do not have to
specify this because it is controlled by the access point you are
using with the device.