Appendix B: Specifying TCP/IP Settings 55
Appendix B

Specifying TCP/IP Settings

Accessing the AP+2’s Web Management Interface requires that
you plug the unit directly into the Ethernet port of a computer. It
also requires that the computer’s TCP/IP settings be set for static
IP addressing and the following IP address and subnet mask:
IP Address: 10.0.0.100
Subnet Mask: 255.255.255.0
This Appendix details how to access and set the TCP/IP settings
for Windows, Macintosh, and Linux operating systems. Depending
on your operating system, follow the steps in the appropriate
section to ensure your TCP/IP settings are correct.
• If you are using Windows, see Windows TCP/IP Settings on
page 56.
• If you are using Macintosh, see Macintosh TCP/IP Setting
on page 59.
• If you are using Linux, see Linux TCP/IP Settings on
page 61.