Zoom AP+2, WIRELESS-G - page 43

Chapter 5: Advanced Options 43
Accessing the WEP/WPA
Configuration Pages
Use these two pages to specify security for your AP+2.
To open these pages, click Wireless in the left-navigational menu,
then click WEP Configuration or WPA Configuration, as
appropriate.
Details about specifying security are covered in Chapter 4: Setting
Security on page 21.
Viewing the Client List Page
Use the Client List page to view the devices that are currently
connected to your wireless network.
To open the Client List page, click Wireless in the left-navigational
menu, then click Client List.
Each device is listed with its MAC address and type. You cannot
configure any settings on this page. However, you can click the
Refresh button to update the list.