Zoom AP+2, WIRELESS-G manual - page 9

Chapter 1: Installing the AP+2 as an Access Point 9
My Windows XP Computer Has
Built-In Wireless Capabilities
1
11
1 On your Windows desktop, click the Start button, then click
Control Panel.
2
22
2 Double-click the Network Connections icon.
3
33
3 Right-click the Wireless Network Connection icon, then
select Properties.
4
44
4 On the Wireless Network Connection Properties dialog
box, select the Wireless Networks tab. Windows XP will
automatically scan for available wireless networks in your area.
Its findings will appear in the Available networks list. It
should find the wireless network of your new access point—
named zoom. (The scan is done automatically because the Use
Windows to configure my wireless network settings check
box is selected by default.)
5
55
5 Select zoom from the Available networks list, then click the
Configure button to add it to the Preferred networks list.
The notebook will try to connect to the Internet using the
wireless networks listed here, in the order in which they
appear. (If you already have networks listed here, we
recommend you either remove them or use the Move up
button to move zoom to the top of the list.)
6
66
6 Click OK.