About SmartMedia

SmartMedia contents

Besides the demo song play data and audio data, the SmartMedia card supplied with the PS-02 contains the system data necessary for operation of the PS-02. Note that the PS-02 will only start up when a suitable SmartMedia card is inserted in the [DATA CARD] slot.

Batteries on Unit the Operating / SmartMedia About

SmartMedia work card

When recording with the PS-02, all audio data is stored on SmartMedia. In the condition as shipped from the factory, the supplied SmartMedia card has a certain amount of free space, but for longer recordings, you will need to erase demo songs or use another SmartMedia card (32MB or higher is recommended).

If the system program contained on the original supplied SmartMedia card is accidentally damaged or erased, the PS-02 will not be able to operate normally. It is therefore strongly recommended to format a new SmartMedia card to create a working card. After doing this, store the original supplied SmartMedia card in a safe place.

For information on how to erase a song, see page 43.

For information on how to format a working SmartMedia card, see page 75.

Operating the Unit on Batteries

 

3. Insert four IEC R03 (size AAA) batteries (the

1. Verify that power to the unit is turned off.

use of alkaline batteries is recommended)

2. Turn the PS-02 over and open the cover

into the compartment, taking care to

establish correct +/- orientation.

of the battery compartment.

 

Push the

tab down and then slide the

 

cover in the

direction.

 

 

Battery

Four IEC R03 (size AAA)

 

compartment cover

batteries

4.Slide the battery compartment cover in the opposite direction to close it.

When the batteries are getting low, the battery indication ( ) appears on the display. When not using the PS-02, do not forget to turn the unit off to preserve battery power.

16