If you press the [BYPASS (TUNER)] key for longer than 1 second and then release it, the unit is set to the mute condition, and the indication "MUTE" appears on the display.

2.Play the open string you want to tune, and watch the display.

The PS-02 automatically detects the pitch and the display shows the note which is closest to the current pitch.

Note C C# D D# E F F# G G# A A# B Could not detect

Display

3.When the display shows the desired note, perform fine tuning of the pitch until a triangle mark is displayed on both sides of the note.

The triangle and dot indication of the display changes as follows, depending on the pitch.

Pitch is low

 

Pitch is correct

 

Pitch is high

 

 

 

 

 

 

 

Guide Reference

4.When wishing to change the reference pitch of the tuner, use the cursor []/[] keys.

The current reference pitch is briefly shown on the display. After power to the unit is turned on, the setting is always "440Hz" (center A = 440 Hz).

5.While the reference pitch setting is displayed, you can use the cursor []/[] keys to change the reference pitch.

The setting range is "435Hz" - "445Hz" in steps of 1 Hz. When you turn the PS-02 off and on again, the reference pitch is reset to "440Hz".

6.Pressing the [BYPASS (MUTE)] key, [EXIT] key, or one of the patch [▼]/[▲] keys returns you to the original menu.

68