[INPUT] jack. While the indication "GTR-G" is displayed, use the cursor [ ]/[ ] keys or slider 1 to select one of the following settings, to match the connected instrument.

•Lo: For instrument with high output, such as a guitar with built-in preamp or a synthesizer

•HI: For instrument with low output, such as a passive guitar (default setting)

When the effect type "MICPRE" is selected for the DRIVE module, this setting is inactive (➝ page 67).

•Setting the microphone gain (MIC-G)

Sets the gain for the built-in microphone or a microphone connected to the [INPUT] jack. While the indication "MIC-G" is displayed, use the cursor [ ]/[ ] keys or slider 1 to select one of the following settings, to match the microphone.

[Using the built-in microphone]

•Lo: This is a gain setting for on-mic recording. It is suitable for holding the PS-02 in your hand while doing a vocal, or for placing the PS-02 very close to an acoustic guitar (about 30 cm from the sound hole).

•HI: This is a gain setting for off-mic recording, such as when capturing an entire band in a studio.

[Using an external microphone]

•Lo: This setting is suitable for high-output microphones.

•HI: This setting is suitable for low-output microphones.

Guide Reference

This setting is only valid when "MICPRE" is selected as effect type for the DRIVE module (➝ page 67).

71