select one. The effect parameter setting changes, depending on the selected effect type.
The Effect Edit menu lets you select the On/Off setting for each effect module and change the value of the effect parameters.
◆Basic operation steps for Effect Edit menu
1.From the Effect menu, use the patch [▼]/[▲] keys to select the patch to edit.
2.Press the [EDIT] key.
The unit switches to the Effect Edit menu, and the indication "EDIT" is shown on the display.
The dot corresponding to the module currently selected for editing flashes, and the name and setting of the parameter that was last edited for that module (or the effect type used by that module) are shown on the display.
Last edited parameter name (or effect type name)
Last edited parameter value
Currently selected module
Approximate setting of parameter that can be adjusted with sliders 1 - 3
•If the Edit menu was called immediately after switching patches, the
DRIVE TYPE is displayed. If the Edit menu was called after performing Easy Edit, the last edited module is displayed.
•If the currently selected module is Off, the indication
3.To select the effect module for editing, use the cursor [
]/[
] keys.
The flashing dot moves left or right, and the parameter name (or effect type used in the module) shown on the display changes accordingly.
DRIVE 
CAB 
ZNR 
EQ1 
EQ2 
MOD 
REV 
TOTAL 
Guide Reference
63