If the interval between the punch-in and punch-out points exceeds the recording capacity of the SmartMedia card, the indication "FULL" will appear and recording will stop when attempting to carry out punch- in/punch-out. Take the recording capacity into consideration when setting the punch-in/punch-out points.
To redo the punch-in/punch-out point setting, press the [EXIT (CANCEL)] key and then repeat the procedure from step 5.
8.To do a practice run for auto punch-in/punch-out, press the [
] key. To actually carry out the function, press the [REC] key.
•When [
] key was pressed
From a point 3 seconds before the punch-in point, playback of the rhythm track + recorded track starts. Between the punch-in and punch-out points, the recorded track is muted (actual recording is not carried out).
•When [REC] key was pressed
From a point 3 seconds before the punch-in point, playback of the rhythm track + recorded track starts. Between the punch-in and punch- out points, recording is carried out. (During playback, the [REC] key is flashing, and during recording, the key is lit.)
9.After passing the punch-out point, press the [■] key.
The unit returns to a point 3 seconds before the punch-in point. If necessary, press the [
] key to check the recording.
10.When wishing to retain the recording, press the [STORE (EXECUTE)] key.
The recording contents are saved (the indication "PRCING" appears on the display), and the unit returns to the Audio menu.
To redo auto punch-in/punch-out, press the [EXIT (CANCEL)] key. The auto punch-in/punch-out recording contents are canceled, and the unit returns to the condition of step 7. To return to the Audio menu, press the [EXIT (CANCEL)] key repeatedly.
The time before the punch-in point (preroll time) to which the unit moves automatically can be set with the Utility menu (➝ page 73).
