Guide Reference

use the cursor []/[] keys to bring up the indication "P- I/O" on the display.

4.Press the [EDIT] key once more.

The indication "PIx" (where x is the track number) is shown. This allows you to set the punch-in point.

Track number

 

 

Current position (minutes/seconds)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.Press the [ ] key to play the song. While listening to the rhythm track and the recorded track, press the [REC] key at the desired punch-in point.

The indication "P-IN" is briefly shown on the display, and the punch- in point is set.

Instead of immediately pressing the [REC] key at the desired punch-in (punch-out) point, you can also press the [ ] key to pause the song, and then later press the [REC] key to set the punch-in (punch-out) point. This method allows you to shift the point in units of 1 second while in pause mode, using the cursor [] ([]) keys.

While setting or executing the auto punch-in/punch-out function, only the current recording track can be monitored.

6.At the desired punch-out point, press the [REC] key once more.

The indication "P-OUT" is briefly shown on the display, and the punch-out point is set.

After setting the punch-in point, it is also possible to stop the song, and later only set the punch-out point by pressing the [ ] key.

7.When the punch-in/punch-out points have been set, press the [■] key to stop the song.

The unit moves to a point 3 seconds before the punch-in point and goes into the auto punch-in/punch-out standby mode. The [ ] key is flashing.

56