PATTERN CHORD RECORD MIXDOWN

5.Press the EFFECT PATCH [▲] key twice.

In chord input mode, the EFFECT PATCH [▼]/[▲] keys serve for moving in 1-beat steps within the measure. The flashing dot that indicates the position within the measure moves to beat 3.

6.Use sliders 1/2 to specify the "A" (A Major) chord.

7.In the same way, enter chord change information for other measures as shown in the diagram on page 18.

◆Editing/deleting chord change information

•To edit entered chord change information, use the chord input display and go to the position whose contents you want to change. Then use sliders 1/2 to specify the new chord.

•To delete entered chord change information, use the chord input display and go to the position whose contents you want to delete. Then set slider 1 to the full down position.

The indication "CHD<--" appears on the display and the selected chord change information is deleted.

If the pattern change information for measure 1 was deleted, playback will use the "Am" (A Minor) chord.

◆Listening to the completed rhythm track

1.To listen to the completed rhythm track, press the [■] key to

terminate chord input mode, and then press the [ ] key.

2.To adjust the tempo, press the [EDIT] key.

The current tempo (BPM) is displayed.

Guide Operation

25