Properties to display the Windows TCP/IP Properties dialog

box.

For Windows 98 and Me: From the desktop click the Start button, then point to Settings and then Control Panel. Double- click the Network icon to display the Network configuration screen. Highlight your NIC card’s TCP/IP entry (it should start with TCP/IP and have the characters 10/100, NIC, or Ether in it

–and not have the words AOL, Dial-up, or Adapter). Click Properties to display the Windows TCP/IP Properties dialog box.

4Windows Users: Enter the IP Settings.

For Windows 2000 and XP:

Click the Use the following IP address and Use the following DNS server addresses buttons so that a black dot appears. Then enter the settings for IP address, Subnet mask, Default gateway, and Preferred DNS server as shown below.

Most users can copy the information exactly as it is shown above and in the chart below. However, if you chose an IP address in Step 2 other than 10.0.0.16, enter the number that you chose

Chapter 1: Installation Instructions

21