Once you’re done, be sure to click Save Changes and then Write Settings to Flash and Reboot.

Then go back to the Advanced Settings page and click DNS. Check the User Configuration box, enter the DNS Server IP address assigned to you by your service provider, and click Add. Do not change any other fields! Click Save Changes and then click Write Settings to Flash and Reboot.

3.3How to Change the X5v’s NAT Setting

The X5v’s NAT (Network Address Translation) capability provides a good level of protection from unauthorized access: It hides the IP addresses of the in-house computers connected to the X5v from other computers outside on the Internet.

In a typical computer setup using NAT, your service provider assigns one public IP address for your network. By virtue of the X5v’s DHCP Server feature, private IP addresses are automatically assigned to the computers on your network. For any data that the computers on your network send to the Internet, NAT substitutes your private IP addresses with the public address supplied by your service provider. That way, it appears to other computers on the Internet that the data packets being sent out originated from your X5v’s single WAN connection, not the computer or computers behind the X5v.

NAPT takes NAT one step further by disguising a computer’s source port in the actual data packet, so that outside users cannot determine either the IP address or the port number of the computer sending the packet.

The X5v’s default setting is dynamic NAPT—everything is automatic. With dynamic NAPT, any computer on your network can use the public IP address (that is, the gateway’s WAN IP address). You shouldn’t want or need to change the X5v’s NAT setting unless you need each computer on your LAN to have its own public IP address. To change the NAT setting, click the NAT button on the Advanced Setup page.

Chapter 3: Advanced Setup Options

45