IP/Mask | There are three ways to use this database. Choices |
| are Single IP, IP Range, or Subnet Mask. Your |
| selection depends on whether you want to specify |
| one IP address for an entire group, a range of IP |
| addresses for a group, or a range of subnet masks |
| for a group. |
|
|
IP Entry Name | Name of your choosing. Purpose is to identify the IP |
| group you want to set up. Maximum field length=19 |
| characters. |
|
|
IP addr.1 | IP address that you want to assign to a group. |
| If you selected Single IP, enter that IP address here. |
| If you selected the IP Range option because you |
| want to designate a range of addresses, enter the |
| beginning of the range here and enter the ending |
| range in the IP addr.2 field. |
| If you selected the Subnet Mask option, enter the |
| desired IP address here and enter the subnet mask |
| in the IP addr.2 field. All addresses falling within that |
| subnet will be included in the group you set up. |
|
|
Chapter 4: Using the X5v’s Advanced Firewall | 65 |