1Your computer must be on. Insert the supplied CD into the CD-ROM drive. The CD starts automatically and the Main Menu opens. (Note: If the CD does not start automatically, on the desktop, click the Start button, click Run, and then type D:\setup.exe, where D is the letter of your CD-ROM drive.)

2Select your language and click the Installation Wizard button. The software installation proceeds automatically.

3When the process is complete, you will be prompted to click Finish and then shut down your computer so you can connect the hardware. After shutting down, be sure to remove the CD from your computer.

1.2 Installing the Hardware

Important! Unplug or turn off the power to your computer before proceeding. Remember, you must install the X5v software before installing the hardware.

Note: If you are replacing an older DSL modem with a X5v, you need to remove the old hardware now.

1Connect the hardware from the X5v’s back panel.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PHONE ADSL

LAN 1 2

3

 

4 USB RESET PWR

aPlug your phone into the PHONE jack.

Tip: If you have a cordless phone with one or more handsets, plug the base station into the X5v’s PHONE jack.

Note: If RJ-11 phone jacks are not used in your country, you will need a phone adapter. Plug the adapter into the X5v’s PHONE jack and plug your phone into the other end.

bPlug one end of the X5v’s phone cord into the X5v’s ADSL jack and the other end into the wall telephone jack (the jack on the wall where you would normally plug in a standard phone). This jack must be a jack that has been connected to ADSL service.

Chapter 1: Installation Instructions

7