Table of Contents

 

Explosive Environments

80

Specifications

81

Notes

82

Getting Started

Installing the Battery and a microSDHC Card

Power off your phone before installing or replacing the battery. You have the option to install a microSDHC card of up to 32GB to expand your phone’s storage capacity. The microSDHC card can be installed and removed while the phone is turned on. Unmount the microSDHC card before removing it.

1.Place your finger in the slot at the bottom of the back cover to lift and remove the cover.

2.Insert the battery by aligning the contacts on the battery with the gold contacts in the battery compartment. Gently push down on the battery until it clicks into place.

WARNING! Do not handle a damaged or leaking Li-Ion battery as you can be burned.

3.Hold your microSDHC card with the metal contacts facing down and slide it into the microSDHC card slot until you hear a click.

4.Press the cover gently back into place until you hear a click.

Charging the Battery

When you first get your new phone you’ll need to charge the battery. If the battery is low, there will be a pop-up message on the screen. As you charge your phone, the screen will tell you the exact battery level each time you wake up your phone.

WARNING! Use only ZTE-approved chargers and cables. The use of unapproved accessories could damage your phone or cause the battery to explode.

1.Connect the adapter to the charging port. Ensure that the adapter is inserted with the correct orientation. Do not force the connector into the charging port.

4

5

Page 4
Image 4
ZTE Z932L user manual Getting Started, Installing the Battery and a microSDHC Card, Charging the Battery