
Chapter 21 System Commands
21.10.3 Other System Commands
The following section lists miscellaneous system commands.Table 80 Other sys CommandsCOMMAND | DESCRIPTION | M |
sys atsh | Displays system information. | R+B |
sys baud <1~5> | Sets the console port speed. 1: 38400 bps, 2: 19200 bps, 3: | R+B |
| 9600, 4: 57600, 5: 115200. |
|
sys callhist display | Displays the call history. | R |
sys callhist remove <index> | Removes an entry from the call history. | R |
sys countrycode [countrycode] | Sets or displays the country code. See Table 64 on page 136 | R+B |
| for the country codes. |
|
sys cpu display | Displays the CPU utilization. | R+B |
sys ddns debug <0:off1:on> | Enables or disables the DDNS debug service. | R+B |
sys ddns display <index> | Displays DDNS information for the specified entry. | R+B |
sys ddns restart <interface> | Updates DDNS on the specified interface. | R+B |
sys domainname | Sets or displays the domain name. | R+B |
sys edit <filename> | Edits the system preset text files such as autoexec.net. | R+B |
sys feature | Displays information on available features. | R+B |
sys filter netbios config <0~10> | NetBIOS (Network Basic Input/Output System) are TCP or | R+B |
<onoff> | UDP broadcast packets that enable a computer to connect to |
|
| and communicate with a LAN. For some |
|
| as PPPoE or PPTP, NetBIOS packets can cause unwanted |
|
| calls. Use this command to turn the NetBIOS filter on or off for |
|
| the specified traffic. |
|
| 0: Between LAN and WAN1 |
|
| 1: Between LAN and DMZ |
|
| 2: Between WAN1 and DMZ |
|
| 3: IPSec pass through |
|
| 4: Trigger Dial |
|
| 5: Between LAN and WLAN |
|
| 6: Between WAN1 and WLAN |
|
| 7: Between DMZ and WLAN |
|
| 8: Between WAN2 and LAN |
|
| 9: Between WAN2 and DMZ |
|
| 10: Between WAN2 and WLAN |
|
| Use on to block NetBIOS traffic flowing in the specified |
|
| direction or off to allow it. |
|
sys filter netbios disp | Displays the NetBIOS filter status. | R+B |
sys firewall | See Chapter 13 on page 87 for details on the these | R+B |
| commands. |
|
sys hostname [hostname] | Sets or displays the system hostname. | R+B |
sys md5 <string> | Hashes the string using MD5. The maximum length of the | R+B |
| string is 64. |
|
sys mode [routerbridgezero] | Sets the ZyWALL to router, bridge, or zero configuration mode | R+B |
| (zero configuration mode applies to the ZyWALL P1). |
|
sys myZyxelCom | See Chapter 18 on page 135 for details on these commands. | R |
sys probeType [icmp arp] | Sets the DHCP server probing type. | R+B |
162 |
| |
ZyWALL (ZyNOS) CLI Reference Guide |
| |
|
|
|