Chapter 23 WWAN Commands
Table 86 wwan Command Summary (continued)

COMMAND

DESCRIPTION

M

wwan config budgetCtrl data dir

Sets whether either transmitted (Tx) or received (Rx), or both

R

[123]

Tx/Rx data should be counted for budget purposes.

 

 

1:Tx

 

 

2:Rx

 

 

3:Tx and Rx

 

 

 

 

wwan config budgetCtrl data

Enables the recording of the amount of Tx/Rx data. This

R

enable [onoff]

information is used for budget management.

 

wwan config budgetCtrl data quota

Sets the data limit measured in megabytes. data_quota may

R

[data_quota]

be between 1 Mb to 100 Gb.

 

wwan config budgetCtrl enable

Enables budget control.

R

[onoff]

 

 

wwan config budgetCtrl highLimit

Sets the upper limit for the data budget.

R

wwan config budgetCtrl highLimit

Sends an alert if the data limit is exceeded.

R

alert [onoff]

 

 

wwan config budgetCtrl highLimit

Allows new 3G connections to be established when the data

R

AllowNewConn [onoff]

limit is exceeded.

 

wwan config budgetCtrl highLimit

Keeps the current 3G connection (ON) or drops it (OFF) if the

R

KeepCurrConn [onoff]

data limit is exceeded.

 

wwan config budgetCtrl highLimit

Sends a log if the data limit is exceeded.

R

log [onoff]

 

 

wwan config budgetCtrl lowLimit

Sets a data level at which to send an alert or log before the

R

 

maximum data limit is reached.

 

wwan config budgetCtrl lowLimit

Sends an alert if the warning level is reached.

R

alert [onoff]

 

 

wwan config budgetCtrl lowLimit

Sets a warning level as a percentage of the data limit.

R

data <%>

 

 

wwan config budgetCtrl lowLimit

Sends a log if the warning level is exceeded.

R

log [onoff]

 

 

wwan config budgetCtrl lowLimit

Sets a time for a warning as a percentage of the Internet

R

time <%>

access time limit.

 

wwan config budgetCtrl resetDay

Sets the day of each month to reset the budget counter.

R

<day>

 

 

wwan config budgetCtrl time

Enables the recording of time spent accessing the Internet for

R

enable [onoff]

budget control.

 

wwan config budgetCtrl time quota

Sets the time limit for Internet access in hours. Maximum is 672

R

[time_in_hours]

hours.

 

wwan config enable [onoff]

Enables 3G Wireless WAN.

R

wwan config idleTimeout

Sets the maximum period the connection may remain idle

R

<time_in_seconds>

before disconnection. time_in_seconds may be 1-9999

 

 

seconds.

 

wwan config multicast enable

Enables multicast for 3G wireless WAN.

R

[onoff]

 

 

wwan config multicast version

Sets multicast to IGMP (Internet Group Management Protocol)

R

[12]

version 1 or 2.

 

 

1:IGMPv1

 

 

2:IGMPv2

 

 

 

 

170

 

ZyWALL (ZyNOS) CLI Reference Guide